Improving basic relationships of pipe hydraulics

This communication presents the approaches set up for processing spinner flowmeter well logs in vertical wells with a single fluid phase, which is the most widely used in assessing wells productivity. These focus on improving the pipe hydraulics relationships so that the different fluid inputs throughout the well can be quantified. Since vertical flow inside wells varies with depth between laminar flows (very low Reynolds number, i.e. Re < 10³) and turbulent (Re > 4·10³) the aim has been to reduce the uncertainty in the transition interval. Starting from bibliographical data and/or well-known formulas for laminar and for turbulent flow, several continuous relationships have been developed for any regime: 1) an expression for the radial distribution of velocity inside the pipeline (velocity profile) was developed. 2) A relationship between the average velocity and the velocity at the axis (velocity factor) was created. 3) A third equation was generated to obtain the friction factor in smooth pipes (and starting from this, a new explicit equation for rough pipes). The purpose has been to have a set of empirical expressions of easy and continuous application for any regime, as an alternative to the use of computer simulations.     

A system for time-fluctuating flow rate measurements in a single-blade pump circuit

Commonly used flow rate measurement systems provide an accurate and stable output value of the quasi-stationary flow rate. In some pump types as e.g. single-blade pumps significant flow rate fluctuations may occur even in steady operation points due to rotor-stator interaction. For the analysis of the time-resolved flow rate a new measurement and evaluation method is presented based on an electromagnetic flow meter. Internal averaging of the flow meter is deactivated and the raw signal is evaluated directly with a sampling rate of 3 kHz. With ensemble-averaging in combination with an impeller position detection, interfering signals acting on the time-resolved measurement signal are filtered out. Accompanying numerical simulations of the pump flow circuit are carried out with a 1D method of characteristics and validated against well-established time-resolved pressure measurements of the pump flow. Experiment and simulation show a resembling trend of pressure as well as flow rate fluctuations over the entire operation range of the pump. Thus, by the combined utilisation of measurement and simulation technique, we assure the validity of the ensemble-averaged flow rate fluctuation results. We find that the flow rate fluctuations show a consistent phase shift to the pressure fluctuations that increases towards overload. The flow rate amplitude is an order of magnitude smaller than the amplitude of the pressure fluctuations.     

XJM-KS型浮选机矿化器负压产生机理研究

浮选机矿化器是用于浮选矿浆预处理的重要设备，其性能的优劣直接影响到浮选机的工作效果。文章通过流体力学仿真软件FLUENT对XJM-KS型浮选机矿化器的内部流场进行数值仿真，重点研究了聚焦式喷嘴布置所带来的流场特征。模拟结果表明，高速的矿浆射流能够在混合室内产生-2.43×10Pa的负压区，从而吸入大量的空气，实现空气与矿浆的有效混合与预矿化，与传统的机械搅拌式矿浆预处理装置相比，该矿化器能够大幅度提高预矿化效果。     

A benchmark data set for two-phase Coriolis metering

For more than a decade there has been growing interest in the use of Coriolis mass flow metering applied to two-phase (gas/liquid) and multiphase (oil/water/gas) conditions. It is well-established that the mass flow and density measurements generated from multiphase flows are subject to large errors, and a variety of physical models and correction techniques have been proposed to explain and/or to compensate for these errors. One difficulty is the absence of a common basis for comparing correction techniques, because different flowtube designs and configurations, as well as liquid and gas properties, may result in quite different error curves. Furthermore, some researchers with interests in the modelling aspects of the field may not have suitable multiphase laboratory facilities to generate their own data sets. This paper offers a small data set that may be used by researchers as a benchmark i.e. a common data set for comparing correction techniques. The data set was collected at the UK National Flow Laboratory TUV-NEL, using air and a viscous oil, and provides experimental points over a wide flow range (8:1 turndown) and with Gas Volume Fraction (GVF) values up to 60%. As a first investigation using the benchmark data set, we consider how data sparsity (i.e. the flow rate and GVF spacing in the experimental grid) affects the accuracy of a correction model. A range of neural network models are evaluated, based on different subsets of the benchmark data set. The data set and some exemplary code are provided with the paper. Additional data sets are available on a web site created to support this initiative.     

澜湄环境利益共同体模式的评价与选择研究

推进澜湄合作是构建周边命运共同体的具体实践，以“同饮一江水，命运紧相连”为主题的澜湄合作机制也为构建澜湄国家命运共同体提供了推进方向。环境问题是澜湄流域最为核心的问题之一，面向澜湄合作中的环境利益问题，文章结合共同体的理念，基于霍尔三维结构理论，总结出合作伙伴环境利益共同体模式、合作联盟环境利益共同体模式与一体化环境利益共同体模式的三种环境利益共同体模式，通过建立环境利益共同体模式的评价指标体系，利用网络层次分析法对澜湄环境利益共同体模式进行评价，选择适合澜沧江-湄公河的环境利益共同体模式。结果表明，在当前的澜湄现状下，以“澜湄六国通过开发流域资源发展本国经济而同时受到其他主体监督以保证不破坏澜沧江-湄公河的生态环境”为主要内容的合作联盟环境利益共同体模式更适合澜湄流域各国，这一模式可以有效解决流域各国经济与环境“两难重”的困境。     

Shear and extensional rheology of selected polysaccharides

Rheology is used for the elucidation of the flow properties of polysaccharide solutions. For a given polysaccharide, both shear and extensional rheological experiments should be performed for the full characterisation of its flow properties. The provided information will facilitate the efficient exploitation of a polysaccharide in various applications. Although shear rheology is widely used in polysaccharides’ characterisation, there are only limited extensional rheology studies due to lack of reliable techniques in the formation of pure extensional flow. However, recently, several commercial extensional rheometers have been developed and thus, accurate extensional experiments can now be performed. The present work initially presents the principles and concepts of both shear and extensional rheology and then reports rheological findings for solutions of various polysaccharides and their derivatives. Xanthan and various members of the galactomannan, cellulose and alginate families were selected.     

航天发动机叶片电解加工流场设计和试验研究

电解加工作为整体构件制造的主要技术之一,其流场设计的合理性将严重影响电解加工过程的稳定性、加工效率和质量。针对航天发动机叶片式扩压器设计了部分阻隔式反W型流场,并开展了与侧流式和反W型流场的仿真比较。仿真结果表明,该流场方式可以保证加工区电解液的高速流动,并能有效避免进/排气边漏液现象。最后,在部分阻隔式反W型流场中开展了叶片式扩压器电解加工试验,在阴极进给速度为0.5 mm/min时加工出了扩压器叶片,验证了流场设计的合理性。     

Mixed convection flow of a Maxwell nanofluid with Hall and ion‐slip impacts employing the spectral relaxation method

This article investigates the Hall and ion‐slip impacts on the mixed convection flow of a Maxwell nanofluid over an expanding surface in a permeable medium. The impacts of Brownian movement and thermophoresis parameters, Soret, Dufour, viscous dissipation, chemical reaction, and suction parameters, are, moreover, considered. Using the similitude changes, the partial differential equations with regard to the momentum, energy, and concentration equations are transformed to an arrangement of nonlinear ordinary differential equations, which are handled numerically utilizing a spectral relaxation method (SRM). The impacts of noteworthy physical parameters on the velocities, thermal, and concentration distributions are investigated graphically. Moreover, the numerical values of skin‐friction coefficients, local Nusselt number, and Sherwood number for different values of the mixed convection parameter $\left(\gamma \right),$ Deborah number $\left(\lambda \right),$ Hall parameter $({\beta }_{\mathrm{H}}),$ ion‐slip parameter $({\beta }_{\mathrm{i}}),$ Dufour number (Du), and Soret number $\left(\mathit{Sr}\right)$ are computed and tabulated. It is discovered that ascent in Deborah number reduces both the stream and transverse velocity profiles, while the inverse pattern is seen with augmentation in the mixed convection parameter. In addition, inverse patterns of the stream and transverse velocity profiles are seen with expansion in magnetic, Hall, and ion‐slip parameters. Besides this, the temperature and concentration disseminations decline with augmentation in Dufour number and chemical reaction parameters, respectively. It is likewise seen that both the skin‐friction coefficients lessen with expansion in Deborah number, and they ascend with upgrade in blended convection and ion‐slip parameters, while the opposite condition is noticed with augmentation in Hall parameter. Furthermore, the reverse trends of local Nusselt and Sherwood numbers are discovered with expansion in the Dufour and Soret numbers.     

高速激光热丝钎焊表面成形质量的控制

高速激光钎焊会引起熔池流动紊乱导致焊缝成形质量恶化,从而限制了其在汽车制造领域的应用。通过正交试验研究了高速下激光功率、送丝角度等工艺参数对焊缝成形质量的影响,发现焊缝成形质量随激光功率增加和送丝角度减小而提升。激光功率是通过影响熔池获得的热输入,从而影响熔池表面扰动的铺展来影响焊缝成形质量的。送丝角度是通过影响焊丝送入熔池的位置,从而影响焊丝对熔池的扰动强度和扰动的铺展速度来影响焊缝成形质量的。采用正交试验获得的最优工艺参数组合进行试验,获得了表面光滑平整无缺陷的高质量焊缝,为激光钎焊在高速下的应用发展奠定了基础。     

超临界CO2环境中温度和流速对N80碳钢腐蚀行为的影响

目的研究超临界CO2环境中温度和流速对N80碳钢腐蚀行为的影响,探讨N80碳钢在超临界CO2环境中的腐蚀机制。方法利用高压釜进行失重和电化学测试,同时利用扫描电子显微镜(SEM)和X射线衍射仪(XRD)进行腐蚀形貌观察和腐蚀产物成分分析。结果当温度为40℃时,腐蚀速率最小,电化学阻抗随时间延长持续减小,此条件下并没形成FeCO3保护膜。升高温度导致腐蚀初期的腐蚀速率明显增大,然而腐蚀某个时刻后,电化学阻抗突然增大,意味着FeCO3保护膜的形成。温度越高,腐蚀24 h后的阻抗越大,产物膜越致密,保护性越好。另外,腐蚀失重速率随流速的增加而增大,电化学测试也表明流速越大,阻抗越小,腐蚀电流密度越大。SEM形貌分析表明,流体流动破坏了FeCO3膜的致密度,降低了其对N80碳钢基体的保护作用。结论尽管升高温度加速了N80碳钢的腐蚀,但却有利于保护性FeCO3膜的形成。温度越高,FeCO3膜越致密。流体流动破坏了保护性FeCO3膜的致密性,加速了N80碳钢腐蚀。